Short side stand Yamaha Tenere 700 T7

Short side stand Yamaha Tenere 700 T7

Short side stand Yamaha Tenere 700 T7. Manufactured by RRP to replace the OEM alloy side stand, for those T7 owners with lowered suspension. It is 30mm shorter than stock, but has the same footrest shape as stock and is fitted with the stock pivot bolt, side stand switch and shroud.

When you fit a lowering link, the bike will not tilt enough when on the original side stand and this can cause the bike to fall over.

RRP's version of the Short Side Stand Yamaha Tenere 700 T7 allows the bike to lean safely with the suspension lowered, and comes complete with a new side stand spring, which is 50% stronger than the OEM, and a single coil, instead of the double coil spring. weaker.

Another advantage for shorter riders is that once the seat is leaned more, with the new kickstand it is much easier to get your leg over the saddle to get on or off the bike.

Easy to install and supplied with a spring puller tool and 10mm hex bit to remove the rear pivot plate bolt, which can be difficult to access with a normal allen key when installing the center stand.

Strongly recommended to use with our tie rods to lower height.

Not recommended for use with suspension lowering systems less than 20mm

Valid for the standard, rally and World Raid models until 2024.

Not valid for 2025 or later models.

Our opinion

High quality piece totally recommended for all those who lower the motorcycle from height. The kit even includes a tool for placing the spring.

En Viejos Pistones We work with the best manufacturers and we are specialists in enduro, trail and scrambler adventure motorcycles. We can offer you the best tools, accessories and spare parts for your motorcycle. If you do not find what you are looking for on the web, do not hesitate to send us an email to: [email protected]  and we will help you find what you need.