EVAP / Canister Suppressor Kit PVE-081

EVAP / Canister Suppressor Kit PVE-081. SmartMoto's EVAP System Removal Kit combines the Electronic Purge Valve Eliminator with all the necessary hardware to allow you to completely remove the EVAP canister, valve and pipe from your motorcycle.

Key features

• Disables Fi error codes associated with the purge valve.
• Replaces a faulty purge valve.
• This kit allows you to remove the EVAP system and all associated tubes.

High quality standards

• The Electronic Purge Valve Eliminator comes with an OEM connector for direct connection, no cutting or splicing required.
• Rubber caps are special heat resistant caps for high durability.
• Sophisticated production and high-quality parts guarantee a top-quality product.
• This product has been tested and developed for the motorcycles listed.

Compatible Models

• Aprilia > RS 125 > 2021 – 2024
• Aprilia > RX 125 > 2021 – 2024
• Aprilia > SX 125 > 2021 – 2024
• Aprilia > Tuono 125 > 2021 – 2024
• Gas Gas > ES 700 (EU) > 2022 – 2024
• Gas Gas > ES 700 (USA) > 2023 – 2024
• Gas Gas > SM 700 (EU) > 2022 – 2024
• Gas Gas > SM 700 (USA) > 2023 – 2024
• HUSQVARNA > 701 Enduro (EU) > 2015 – 2024
• HUSQVARNA > 701 Enduro (USA) > 2015 – 2024
• HUSQVARNA > 701 Supermoto (EU) > 2015 – 2024
• HUSQVARNA > 701 Supermoto (USA) > 2015 – 2024
• HUSQVARNA > 701 VITPILEN / SVARTPILEN > 2018 – 2020
• Indian > Chief > 2014 – 2020
• Indian > Chieftain > 2014 – 2020
• Indian > Roadmaster > 2015 – 2020
• Indian > Scout > 2015 – 2020
• Indian > Springfield > 2016 – 2020
• KTM > 250 Duke > 2017 – 2020
• KTM > 390 Duke > 2014 – 2020
• KTM > 390 Duke > 2023 – 2026
• KTM > 690 Duke / R > 2016 – 2019
• KTM > 690 Enduro / R (EU) > 2019 – 2024
• KTM > 690 Enduro / R (USA) > 2019 – 2024
• KTM > 690 SM / SMR / SMC (EU) > 2019 – 2024
• KTM > 690 SM / SMR / SMC (USA) > 2019 – 2024
• KTM > RC 390 > 2014 – 2021
• Moto Guzzi > V7 > 2021 – 2024
• Moto Guzzi > V85TT > 2021 – 2024
• Moto Guzzi > V9 > 2021 – 2024

EVAP system draw kit installation

Products covered: PVE-081, PVE-051

Step 1: : Remove the fuel tank according to the owner's manual. Locate the EVAP valve (13), lines (7)(9)(11), and EVAP system canister (1).

Step 2: : Disconnect the EVAP valve (13) from the wiring harness and connect the supplied electronic eliminator in its place.

Step 3: Follow the lines (5)(8)(9) from the EVAP valve (13) to the cylinders and use one of the two methods to seal the line.

1. a) Use the large M8 bolt on the tube (9).
2. b) Use the small M6 bolt with the copper washer to replace the nozzle on the barrel.

Step 4: : Remove the EVAP valve (13), piping and its associated hardware (5)(6)(7)(8)(9)(10)(11) and canister (1) from the motorcycle.

Step 5: Reroute the tubing (7) from the fuel tank to the ground or to a collecting can.