Set of led flashing resistors
Set of led flashing resistors. With this kit, you can convert your standard bulb turn signals into an LED turn signal. This special resistor restores the cycle speed of your original flasher relay to within the ADR standard of 90 ± 30 flashes per minute. You only have to connect it between your original wiring and the flashing led that you put. They are specially designed for plug-in led turn signals to led pin but they work for any led indicator.

The package contains 2 resistors.
1 is placed for each intermittent.
Ready to insert between the original cables and the new indicator.
It is normal for these resistors to produce some heat when used. The type of connector it comes with is the standard round one, although you can put any other to adapt it to your motorcycle.
Remember that if you put led turn signals on a vehicle that does not come standard (buggy, motorcycle, quad...), you must always put a resistor inserted in each turn signal or change the flasher relay for a specific one for led turn signals, since if If you do not, the flashing cycle required by approval (pulses per minute) will not be maintained. And remember that, unlike bulb turn signals, it is essential to position the positive and negative cables correctly in LEDs. Make sure which is which with a multimeter or test light before installing.
En Viejos Pistones we are specialists in off road motorcycles both enduro and Trail or Maxitrail. We can help you to leave your motorcycle as you really need it. Whether you are an adventurer who wants to see the world or an experienced rally driver. Together we will study the best accessories that we will put on the motorcycle to optimize its operation for what you are going to use it for. Suspensions, autonomy, luggage, protection will not be a problem for us. If you can't find the item you need or have any questions about the material, you know that you can contact us via WhatsApp on the website or by sending us an email to: [email protected]













