CoolAIR RFS-010 Manual Radiator Fan Switch
42,50€ VAT Incl.
CoolAIR RFS-010 Manual Radiator Fan Switch
The idea of the whole procedure is to disconnect the connectors from the radiator fan relay, connect the CoolAIR switch connectors to the connectors, install the ring connector on a frame bolt and place the switch on a fixed point on the motorcycle with the installation kit.
Please read the steps carefully before starting the installation and note that the ignition must be OFF during the whole procedure.
PASO 1: Find the radiator fan relay. On most Suzuki motorcycles, it is located under the left side front panel (19) near the dash or under the front seat on some GSXR models.
PASO 2: Disconnect the radiator fan relay connector by pressing the tab at the top of the connector and pulling out.
STEP 3: : Connect the switch connectors, the female connector to the relay connector and the male connector to the wiring harness.
STEP 4: : Install the ring connector on a stud in the frame.
PASO 5: Now you can connect the switch to a fixed point on the motorcycle with a cable tie or through a hole in the fairings using the waterproof installation kit.
Available for booking
CoolAIR RFS-010 Manual Radiator Fan Switch
The CoolAIR RFS-010 manual radiator fan switch is a smart manual radiator fan switch that connects to the radiator fan relay and uses the standard radiator fan to prevent the engine temperature from rising.
It incorporates a smart design and even when switched off it maintains the standard operation of the radiator fan; the fan will turn on normally when the coolant temperature reaches the preset level.
In this product we pay special attention to durability.
The new advanced design uses PCB technology for the installation of the internal parts and the rugged switch housing.
Key features
- It keeps the engine temperature at low levels and protects the engine from overheating in traffic.
- Perfect for performing maintenance tasks on your motorcycle that require extended idling, such as adjusting the TPS.
- Smart design that maintains standard radiator fan operation when the CoolAIR switch is turned off.
- Connects with OEM sealed connectors, plug and play installation, no wire cutting required.
- Waterproof design
- LED indicator with LED bracket for panel installation
- Cable length: 190 cm
High quality standards
- We use only OEM connectors to ensure a perfect fit.
- Sophisticated production and high-quality parts guarantee a top-quality product.
- This product has been tested and developed for the motorcycles listed.
Compatible Models
- Aprilia > Dorsoduro 750 > 2008 – 2016
- Aprilia > Dorsoduro 900 > 2017 – 2020
- Aprilia > MANA 850 > 2007 – 2016
- Aprilia > RSV4 1000 > 2009 – 2020
- Aprilia > RSV4 1100 > 2019 – 2020
- Aprilia > Shiver 750 > 2007 – 2016
- Aprilia > Shiver 900 > 2017 – 2020
- Aprilia > Tuono V4 1000 > 2011 – 2014
- Aprilia > Tuono V4 1100 > 2015 – 2020
Take a look at the rest of SmartMoto accessories by clicking HERE.
En Viejos Pistones we are specialists in off road motorcycles both enduro and Trail or Maxitrail. We can help you to leave your motorcycle as you really need it. Whether you are an adventurer who wants to see the world or an experienced rally driver. Together we will study the best accessories that we will put on the motorcycle to optimize its operation for what you are going to use it for. Suspensions, autonomy, luggage, protection will not be a problem for us. If you can't find the item you need or have any questions about the material, you know that you can contact us via WhatsApp on the website or by sending us an email to: [email protected]
| Weight | 0,1 kg |
|---|
Related products
450 Rally
workshop equipment
CRF 250 / 300L / Rally
450 Rally
workshop equipment
1190/Adventure/R
luggage racks
